182 '.' charcters follows '@' character immediately!
183 '.' character at the end of email address!
184 Non 7-bit character in email address!
185 Two consecutive '.' characters in email address!
186 No '.' character in email address after '@' character!
187 No mailbox in email address!
188 '@' character in mailbox!
189 '.' character at the end of the mailbox!
190 '@' character in domain!
191 No domain in email address!
192 No email address!
193 Invalid wildcard mailbox!
194 Invalid wildcard domain!
195 .
5000 Workgroup does not exist! Get the system administrator to make one.
5001 Failed to load workgroup from the database!
5002 Failed to load users from the database!
5003 Failed to bind to address %s on port %d
5004 You must supply a password of six characters or more!
5005 The keycode you have supplied is incorrect!
5006 Failed to load attachments from the database!
5007 Failed to add attachment to the database!
5008 Failed to load recipients from the database!
5009 Failed to add recipient to the database!
5010 Failed to load messages from the database!
5011 Failed to add message to the database!
5012 Failed to delete attachments from the database!
5013 Failed to delete recipients from the database!
5014 Failed to open workgroup table!
5015 Failed to open user table!
5016 Failed to open sent messages table!
5017 Failed to open recipients table!
5018 Failed to open received messages table!
5019 Failed to load received messages from the database!
5020 Failed to load received recipients from the database!
5021 Failed to open received recipients table!
5022 Failed to open attachments table!
5023 Failed to open recipients table!
5024 Failed to open messages table!
5025 Failed to save recipient '%1' to the database!
5026 Failed to add event log to the database!
5027 Failed to load event logs from the database!
5028 Failed to delete event logs from the database!
5029 Failed to load domain names from the database!
5030 Failed to add domain name to the database!
5031 Failed to save domain name '%1' to the database!
5032 Failed to delete domain name '%1' from the database!
5033 Failed to save the user '%1' to the database!
5034 Failed to add the user '%1' to the database!
5035 Failed to delete the user '%1' from the database!
5036 Failed to delete the message from the database!
5037 Failed to save attachment to file '%1'!
5038 Failed to load attachment from file '%1'!
5039 %1 cannot be sent to. The reply given by the service provider was '%2'.\n-----------------------------------------------------\n
5040 %1 cannot be sent to. This may be a temporary problem. The message will be automatically resent later on. The reply given by the service provider was '%2'.
5041 The error given by the service provider is '%1'.
5042 Recipient '%1' in message '%2'
5043 The message %1
5044 '%1', sent by '%2'
5045 %1 could not be sent to '%2'.
5046 Failed Mail
5047 System Administrator
5048 The computer is not receiving a response from the modem.\nCheck that the modem is plugged in, and if necessary, turn the modem off, and then turn it back on.
5049 Could not save the file '%1'!
5050 Could not load the file '%1'!
5051 Failed to connect to the dial-up service '%1'!
5052 Failed to get dial-up information for the service '%1'!
5053 Failed to get existing dial-up connections!
5054 Failed to hang up!
5055 Failed to open file '%1' for writing!
5056 Failed to close file '%1'!
5057 Failed to write to file '%1'!
5058 Failed to save password!
5059 The modem is being used by another Dial-Up Networking connection or another program. Disconnect the other connection or close the program and then try again again.
5060 Connecting to %1
5061 Failed to connect to the POP3 server '%1'! Please check that you have entered a valid user name and password.
5062 Failed to connect to the server! The server may not be responding.
5063 Connection opened
5064 Connection closed
5065 Windows Sockets: not initialized!
5066 Windows Sockets: network down!
5067 Windows Sockets: address in use!
5068 Windows Sockets: fault!
5069 Windows Sockets: in progress!
5070 Windows Sockets: address family not supported!
5071 Windows Sockets: invalid!
5072 Windows Sockets: no buffers!
5073 Windows Sockets: not socket!
5074 Windows Sockets: no more file handles!
5075 Windows Sockets: port not supported!
5076 Windows Sockets: wrong port type!
5077 Windows Sockets: socket type not supported!
5078 Windows Sockets: unknown error!
5079 Failed to send the message '%1'!
5080 Failed to receive the message '%1'!
5081 Failed to load received attachment '%1'!
5082 Failed to load received message from the database!
5083 Failed to load sent messages from database!
5084 Failed to load messages from the database!
5085 POP3 socket forced state to idle and reset server
5086 POP3 socket forced state to reset
5087 Non-last line received
5088 POP3 deliberately not reconnecting - not in idle
5089 Failed to load received binary messages!
5090 POP3 Connection failed
5091 Failed to save attachment '%1' to database!
5092 Failed to connect to the dial-up service: %1!
5093 Port already open!
5094 Disconnection occurred!
5095 Remote disconnection occurred!
5096 Port not available!
5097 Line busy!
5098 Voice answer!
5099 No answer!
5100 No carrier!
5101 No dialtone!
5102 Authentication failure!
5103 Bad phone number!
5104 Failed to open attachments table!
5105 Failed to save message '%1' to database!
5106 Failed to load message data from database!
5107 Failed to open received message data table!
5108 Failed to receive message data!
5109 The SMTP server rejected the message '%1' due to an incorrect From: field. The reply given by the service provider was '%2'.\n-----------------------------------------------------\n
5110 There was a problem reading or writing temporary files during processing of messages. Please ensure that there is sufficient disk space.
5111 Problems were encountered during the reception of a message. Please ensure that the gateway computer has sufficient disk space and resources.
5112 Problems were encountered during the communication with the server. Please ensure that the gateway computer has sufficient disk space and resources.
5113 Failed to write data during the encode/decode process. Please ensure that the gateway computer has sufficient disk space and resources.
5114 You have run out of disk space. The current operation will not be completed properly. Shut down the application, free up some space and try again.
5116 Decoding message...
5117 Decoding message '%s'
5118 Accepted connection from '%s'
5119 Status: Initialising Modem...
5120 Status: Dialing...
5121 Status: Verifying user name and password...
5122 Decoding received attachments
5123 Idle
5124 Disconnect while busy?
5125 Committing changes to database
5126 Reading data from database...
5127 [%s] Received message (%d of %d)
5128 Received local message
5129 Received message
5130 Failed to send (error %1)!
5131 Not Connected
5132 Submitting message
5133 Checking for messages to send
5134 Adding received data to database
5135 Checking for new received messages
5136 Encoding attachments
5137 Extracting messages from received data
5138 Start
5139 Stop
5140 %s logging RX messages
5141 %s logging TX messages
5142 %s logging responses
5143 %s logging forwarding
5144 SENDING: attempting to add message '%s' to database
5145 SENT: successfully added message '%s' to database
5146 SEND FAILED: failed to add message '%s' to database
5147 Failed to connect to the SMTP server '%1' in order to send mail! The server may not be responding.
5148 Failed to connect to the POP3 server in order to receive mail! The server may not be responding.
5149 Failed to open sent recipients table!
5150 Failed to load sent recipients!
5151 Cannot create new dial-up connection! Make sure that dial-up networking is installed properly on this machine.
5152 Failed to get dial-up services!
5153 Memory error while trying to get dial-up services!
5154 New dial-up service is not available on this operating system!
5155 Dial-up service properties is not available on this operating system!
5156 Problems were encountered during the download of a message header.
5157 Writing attachment data
5158 Writing data to database
5159 Committing changes to database
5160 Fingered SMTP Server
5161 Latched on to existing connection
5162 Connecting to host...
5163 Connected to host!
5164 Compressing data...
5165 Successful compression to %d%% of original size!
5166 Decompressing attachment...
5167 Finished decompressing attachment!
5168 Writing encoded attachment to database
5169 Writing decoded attachment to database
5170 Reading data from database
5171 Encoding attachment %1
5172 Finished encoding attachment %1
5173 Decoding attachment %1
5174 Finished decoding attachment %1
5175 Encoding %1
5176 Decoding...
5177 Connected to POP3 client, ready to send
5178 Connected to POP3 Server [%1]
5179 Connected to POP3 server, ready to receive
5180 Talking to POP3 client...
5181 Sending local message '%1'
5182 Talking to POP3 server...
5183 [%1] Possible error or no messages waiting at POP3 server
5184 [%1] %2 messages waiting at POP3 server
5185 [%1] No messages waiting at POP3 server
5186 Receiving data from POP3 server
5187 Written message to database
5188 Received %1 bytes
5189 [%1] Finished receiving mail
5190 Disconnected from POP3 server [%1]
5191 Disconnected from POP3 client
5192 Decoded %1 of %2 bytes
5193 Mail Gateway Window
5194 Talking to SMTP server...
5195 Sending message '%1' %2
5196 Talking to SMTP client...
5197 Receiving data from local client...
5198 Receiving data...
5199 Finished receiving local mail
5200 Finished receiving mail
5201 unsuccessful
5202 start
5203 ok
5204 failed
5205 cancelled
5206 unknown
5207 SENDING: attempting to send message '%1' to internet
5208 SENT: successfully sent message '%1' to internet
5209 SEND FAILED: failed to send message '%1' to internet
5210 RECEIVING: attempting to receive message '%1' from internet
5211 RECEIVED: successfully received message '%1' from internet
5212 RECEIVE FAILED: failed to receive message '%1' from internet
5213 RECEIVING: attempting to read message '%1' from database
5214 RECEIVED: successfully read message '%1' from database
5215 RECEIVE FAILED: failed to read message '%1' from database
5216 %1 responding to message '%2'
5217 Message '%1' forwarded to %2
5218 Message %1 forwarded to %2
5219 Read %1 of %2 bytes
5220 Written %1 of %2 bytes
5223 Connected to SMTP server, ready to send
5224 Connected to SMTP server
5225 Disconnected from SMTP server
5226 Connected to local SMTP client
5227 Connected to remote SMTP client
5228 Disconnected from SMTP client
5229 FROM %1, TO %2
5230 Sending data
5231 Sent %1 out of %2 bytes
5232 Failed to save workgroup record!
5233 Reading message
5234 Encoding data
5235 Added %1 digital IDs to the OfficeTalk digital ID store!
5236 No Digital IDs were added!
5237 Failed to add all digital IDs!
5238 Retrying in %1 seconds.
5239 Certificate Properties
5240 Failed to close debug output file!
5241 Failed to write to debug output file!
5242 Failed to create socket
5243 Failed to write the file %s
5244 The message '%s' could not be sent. The ISP returned the response: %s
5245 Refused connection
5246 Performing DNS lookup for '%1'
5247 DNS lookup for '%1' failed!
5248 Unable to find server for address(es)
5249 MX record configuration error: MX record points to local computer.
5250 High
5251 Normal
5252 Low
5253 Attempting dial-up connection (%1)
5254 Connected dial-up connection (%1)
5255 Failed to make dial-up connection (%1)
5256 Inbox
5257 Credentials failed
5258 SMTP communication error
5259 DNS server not responding
5260 The DNS server %s could not be contacted for at least %d minutes. Messages will not be sent while the DNS server is not responding.
5261 The DNS servers %s and %s could not be contacted for at least %d minutes. Messages will not be sent while the DNS servers are not responding.
18433 Failed to copy the file '%1'. This may be because the file is already installed and is in use. You may still be able to continue the installation by pressing Ignore.
18434 You must now restart your machine to complete setup! Would you like to restart now?
18435 error code
18436 Unable to remove the read only flag from '%1'! This file may not be updated properly on reboot.
18437 Failed to adjust privilege value
18438 Failed to lookup privilege value
18439 Failed to get process token
18440 Failed to restart the system
24587 Received - checking for possible responder action
24588 Received - checking for possible forward action
24589 Received - adding to database
24590 There are %1 days remaining before your trial period expires.
24591 Your license has expired! Please visit us at %2 and purchase %1. When you do so you will be sent a keycode to re-enable %1 and turn your copy of WorkgroupMail into a fully licensed product.
24592 There are %1 days remaining before your extended trial period expires.
24593 Send/Receive
24594 Forwarding
24595 Address
24596 Unable to load data from file
24597 Data file does not exist
24598 Failed to load settings file %1!
24599 Failed to save settings file %1!
24600 Data not loaded
24601 You have defined more users than you have licenses for. Either delete some users or purchase more licenses from %1.
24602 You must supply a valid address!
24603 English (US)
24604 %1 cannot run as you have no active ISPs defined! Use the %1 administrator to define ISPs.
24605 Failed to read response file '%1'!
24606 Time Range
24607 Time
24608 Specify the range of times when it is permitted to connect to this ISP.
24609 &Close
24610 Disconnect from the dial-up service?
24611 Unknown
24612 This keycode cannot be used! Please contact support@workgroupmail.com quoting the code 5316.
24613 Public Folder
24614 Public Folders
24615 Quarantine Area
24616 Quarantine Areas
24617 Times
24618 Default Quarantine
24619 %1 cannot run as you have no active domains defined! Use the %1 administrator to define domains.
24620 Failed to automatically delete user: %1
24621 Failed to quarantine file %1.
24622 There is no response file for the responder '%1'!
24623 Not all plugins could be called.
24624 Failed to check file %1 with plugins.
24625 Failed to check message file with plugins.
24626 Re
24627 Responded with file %1.
24628 Failed to respond with file %1. Check that the file exists.
24629 The address %1 does not appear to be valid and has not been responded to.
24630 Reloading data
24631 The local mail servers could not be started! Check your interfaces in the settings property sheet.
24632 ISP is SMTP only & auto disconnect & time to check disconnect.
24633 ISP is not SMTP Only & Internet server not busy & auto disconnect.
24634 Trying to disconnect.
24635 Failed to create SpamCleanser update thread!
24636 Failed to open the Workgroup table. Please ensure that the database is a valid database. If necessary, re-run setup.
24637 Unable to determine the IP address of your computer. Ensure that you are not connected via dial-up networking to another network.
24638 Unable to load settings file WMData.dat!
24639 No IC servers are busy.
24640 IC server is connected.
24641 Disconnecting: Enabled with no prompt.
24642 Disconnecting: Enabled with prompt.
24643 Not disconnecting.
24644 Sent message '%1'.
24645 Received message '%1'.
24646 Failed to receive message '%1'.
24647 Connection timed out
24648 WorkgroupMail
24649 seconds
24650 minutes
24651 hours
24652 days
24653 Unable to remove user folder
24654 Unable to determine user folder name
24655 User has no ID
24656 Unable to save data to file
24657 Quarantined spam message
24658 Failed to quarantine spam message
24659 Home Edition
24660 Professional Edition
24661 Enterprise Edition
24662 Version
24663 Unable to unquarantine message '%1'
24664 Address blocked: %1
24665 and
24666 %1 Home Edition
24667 %1 Professional Edition
24668 %1 Enterprise Edition
24669 This quarantine area was created automatically. Unless specified otherwise, all quarantined items will be placed in this quarantine area.
24670 %1 Home Edition only supports one domain! Delete all but one domain and restart the service.
24671 Outblaze Business Mail Server
24672 Please visit us at %2 to purchase %1. When you do so, you will be sent a keycode to turn your copy of %1 into a fully licensed product.
24673 I am out of the office until <OutUntil>. I shall contact you upon my return.\n\nKind regards\n\n<UserName>\n
24674 Failed to send
24675 The local IP addresses are:
24676 User restricted from using IMAP
24677 organization
24678 family
24679 &%1 Name
24680 Unable to remove folder
24681 Quarantine area has no ID
24682 Public folder has no ID
24683 Sent Items
24684 WorkgroupMail
24685 Failed to export addresses!
24686 whole word
24687 Updating SpamCleanser Data
24688 Sent Messages
24689 Received Messages
24690 Failed to update the SpamCleanser registration status!
24691 SpamCleanser is now registered! You have 30-days in which to try SpamCleanser. To continue benefiting from SpamCleanser after this time, you must subscribe to the service. For more information, see http://www.workgroupmail.com/spamcleanser.asp.
24692 There was a problem registering SpamCleanser! Please try again later.
24693 SPAM
24694 You must supply an organization name that contains only 7-bit ASCII characters!
24695 and
24696 You must supply an SMTP server name that contains only 7-bit ASCII characters!
24697 You must supply a POP3 server name that contains only 7-bit ASCII characters!
24698 Failed to create public folder rule thread!
24699 Failed to create quarantine area rule thread!
24700 Read Access
24701 Create Access
24702 Edit Access
24703 Delete Access
24704 No Access
24705 Failed to load settings file %1! The error given was: %2
24706 You have already trialled SpamCleanser! To purchase a subscription to SpamCleanser please go to http://www.workgroupmail.com/purchase_spam_cleanser.asp.
30577 Setup
30578 &Next
30579 Your email address must not begin with '@'!
30580 Internal Mail
30581 Connection
30582 Details
30583 Mail Server
30584 You must supply a name for your organization!
30585 Welcome
30586 Setup will not be complete until you restart your computer!
30587 Failed to copy the manual file.
30588 Select Folder
30589 &Accept
30590 Failed to copy link to web page!
30591 Failed to save settings!
30592 Choose whether to install %1 as an executable or as a Windows service (NT, Windows 2000 && Windows XP only). Installing as an executable is recommended.
30593 Press the Next button to proceed with %1 setup.
30594 Undocumented error
30595 You are changing the folder which contains messages and configuration files! Would you like to move these files to the new folder (Yes) or discard messages and create new configuration files (No)?
30596 Organization
30597 User
30598 Modem
30599 Failed to copy file %1!
30600 Failed to create the folder %1!
30601 License
30602 You must supply a full name!
30603 You must supply a mailbox name!
30604 You must supply a POP3 login name!
30605 You must supply a POP3 password!
30606 Your domain name should not have a '@' symbol in it! The domain name should be the text after the '@' symbol in your email address.
30607 You must supply a domain name!
30608 Failed to backup data files to %1! Press OK to proceed with setup. Press Cancel to exit setup so you can backup your files manually.
30609 You must install Internet Explorer 4.0 or later in order to use WorkgroupMail! Please install the latest version of Internet Explorer and then re-run WorkgroupMail setup.
30610 Please choose a folder.
30611 &Path
30612 &Folders:
30613 &Drives:
30614 You must supply a name for your ISP!
30615 Your domain name should not have 'www.' at the start as this is a web address!
30616 Your mailbox name should not have a '@' symbol in it! The mailbox name should be the text before the '@' symbol in your email address.
30617 Executable Type
30618 Your domain name should have a '.' symbol in it! The domain name should be the text after the '@' symbol in your email address.
30619 Your domain name should not have a '.' symbol at the end! The domain name should be the text after the '@' symbol in your email address.
30620 You must supply your name!
30621 Start %1
30624 Failed to copy payment.txt file!
30625 Email addresses should not begin with 'www'! For example; john@company.com
30626 An email address should contain the '@' character! For example; john@company.com
30627 Failed to copy uninstall.exe!
30629 Remote Access Services must be installed before you can use dial-up services. For more information, consult your Windows documentation.
30630 An email address should contain at least one '.' character after the '@' character! For example; john@company.com
30631 An email address must not end in the '.' character! For example; john@company.com
30632 Summary
30633 Configuration
30634 You must supply an email address!
30635 You must supply the address of a primary DNS server!
30636 Your %1 name is %2.
30637 Your name is %1.
30638 Internet Service Provider (ISP)
30639 Your email address is %1@%2.
30640 %1 will send and receive mail every %2 minutes.
30641 %1 will send and receive mail when there are %2 messages waiting.
30642 %1 will send and receive mail when there is 1 message waiting.
30643 %1 will collect mail for the %2 from a multiple POP3 mailbox.
30644 Internet Connection
30645 %1 will collect mail for certain users from their own POP3 accounts.
30646 DNS Servers
30648 Failed to copy mfc42.dll! Close down all applications which may be using this DLL and try again.
30649 Account Information
30650 Are you sure you wish to exit setup?
30652 An email address must not contain two or more '.' characters together! For example; john@company.com
30653 You must supply a valid folder path!\nAlso ensure you have READ/WRITE access to the drive/folder.
30654 You must specify full folder path!
30655 Cannot install program files to the root folder!
30656 You must supply the account name of a user who has administrative access to this machine!
30657 Passwords do not match!
30658 You must specify a name for the ISP!
30659 You must specify an outgoing mail (SMTP) server address!
30660 You must specify an incoming mail (POP3) server address!
30661 You must select a dial-up service!
30662 Failed to set account privileges!
30663 Failed to get account SID!
30664 Unable to open policy details for this computer!
30665 OLE failed to initialize!
30666 This computer must be restarted before setup can proceed.
30667 Please enter a valid path.
30668 Failed to connect to the selected drive!
30669 Failed to copy the file %1! This may be because an existing DLL of the same name is already in use, or because you do not have access to copy the file, or you have insufficient disk space.
30670 The setup program failed to register the %1 component object with the operating system!
30671 Failed to update the NT service! Please re-run setup and ensure that you enter the correct account name and password. The account name must be a user that has administrative access to the computer.
30672 Failed to create the NT service! Please re-run setup and ensure that you enter the correct account name and password. The account name must be a user that has administrative access to the computer.
30673 Failed to grant the account %1 access to log on as a service!
30674 Failed to run the migrate.exe program! Check that this is in the same folder as the setup.exe program.
30675 Failed to register installation time!
30676 Shortcut to %1
30677 Stopping %1...
30678 Copying files...
30679 Upgrading from v5.x...
30680 Failed to initialize the migration program! Setup cannot continue.
30681 Failed to create the startup shortcut to the %1 server program!
30682 Creating program group...
30683 Creating NT Service...
30684 Complete.
30685 Failed to run the %1 administrator!
30686 Failed to run the %1 server program!
30687 Failed to run the %1 service!
30688 Failed to register the shared address book API!
30689 %1 will send and receive mail on startup.
30690 %1 will send and receive mail directly using SMTP.
30691 Make sure you arrange for all mail to be sent to the computer running %1.
30692 This is done by adding an MX record to the appropriate DNS server.
30693 %1 will be used for internal mail only.
30694 %1 settings will remain the same.
30695 The setup program files will be installed over your existing program files.
30696 The existing version of %1 will be upgraded.
30697 For marketing purposes, a message will be sent to confirm your successful installation. This message will just contain your email address and will not be given to third parties for purposes other than assisting you with %1.
30698 Start
30699 Web Site
30700 Purchase %1
30701 Feedback
30702 User Guide
30703 Readme File
30704 Administrator
30705 License File
30706 WorkgroupMail
30707 %1 is configured as a standard ISP based mail server.
30708 Enter the name of your %1, your name and your email address.
30709 If you do not wish to send this confirmation message, then delete the message from the %1 administrator before running the server program.
30710 Failed to register the mailing list API!
57345 Ready
57664 Display program information, version number and copyright\nAbout
57665 Exit setup\nExit
61184 Change the window size
61185 Change the window position
61186 Reduce the window to an icon
61187 Enlarge the window to full size
61190 Close the active window
61202 Restore the window to normal size
61203 Activate Task List
61440 Open
61441 Save As
61442 All Files (*.*)
61443 Untitled
61446 an unnamed file
61457 &Hide
61472 No error message is available.
61473 An unsupported operation was attempted.
61474 A required resource was unavailable.
61475 Out of memory.
61476 An unknown error has occurred.
61696 Invalid filename.
61697 Failed to open document.
61698 Failed to save document.
61699 Save changes to %1?
61700 Failed to create empty document.
61701 The file is too large to open.
61702 Could not start print job.
61703 Failed to launch help.
61704 Internal application error.
61705 Command failed.
61706 Insufficient memory to perform operation.
61707 System registry entries have been removed and the INI file (if any) was deleted.
61708 Not all of the system registry entries (or INI file) were removed.
61709 This program requires the file %s, which was not found on this system.
61710 This program is linked to the missing export %s in the file %s. This machine may have an incompatible version of %s.
61712 Please enter an integer.
61713 Please enter a number.
61714 Please enter an integer between %1 and %2.
61715 Please enter a number between %1 and %2.
61716 Please enter no more than %1 characters.
61717 Please select a button.
61718 Please enter an integer between 0 and 255.
61719 Please enter a positive integer.
61720 Please enter a date and/or time.
61721 Please enter a currency.
61728 Unexpected file format.
61729 %1\nCannot find this file.\nPlease verify that the correct path and file name are given.
61730 Destination disk drive is full.
61731 Unable to read from %1, it is opened by someone else.
61732 Unable to write to %1, it is read-only or opened by someone else.
61733 An unexpected error occurred while reading %1.
61734 An unexpected error occurred while writing %1.
61836 Unable to read write-only property.
61837 Unable to write read-only property.
61840 Unable to load mail system support.
61841 Mail system DLL is invalid.
61842 Send Mail failed to send message.
61856 No error occurred.
61857 An unknown error occurred while accessing %1.
61858 %1 was not found.
61859 %1 contains an invalid path.
61860 %1 could not be opened because there are too many open files.
61861 Access to %1 was denied.
61862 An invalid file handle was associated with %1.
61863 %1 could not be removed because it is the current directory.
61864 %1 could not be created because the directory is full.
61865 Seek failed on %1
61866 A hardware I/O error was reported while accessing %1.
61867 A sharing violation occurred while accessing %1.
61868 A locking violation occurred while accessing %1.
61869 Disk full while accessing %1.
61870 An attempt was made to access %1 past its end.
61872 No error occurred.
61873 An unknown error occurred while accessing %1.
61874 An attempt was made to write to the reading %1.
61875 An attempt was made to access %1 past its end.
61876 An attempt was made to read from the writing %1.
